Omni Station Combined Kit, 10 x 25mm, 230v

Product description:

• The Omnistation MKII has been designed to provide a comprehensive answer to heating/cooling fluids in various vessel formats for the modern laboratory. It combines the traditional energy regulator heating with heating & temperature feedback control. Your Omnistations features include stirring control, dry block heating / cooling, and interchangeable mantle / dry block cartridges.
  
  Omnistations are modular in design. They consist of a controller / stirrer unit with plug-in heater cartridge options. The main controller and stirrer module cases are made from injection moulded ABS flame-retardant thermoplastic. The Heater cartridge case is spun aluminium, with a robust polyester powder paint coating.
  
  The heating is controlled by either a solid-state regulator, which displays the heat setting as a % of the total energy capacity. With the temperature probe fitted, the heating is controlled via a temperature feed back circuit and the set point, fluid or block sensed temperatures are displayed.
  
  Uniform stirring is provided via a motorised rotating magnet assembly positioned to provide maximum magnetic flux linkage to rotate stirrer bars in each of the reaction vessels.
  
  A controlled cooling capability is provided by means of the cooling plug accessory. The cooling plug is inserted into the core of the dry block. Chilled water or other coolant is circulated through the plug to provide an effective heat transfer medium. A dry block can be cooled from ambient to a defined lower temperature by means of the cooling plug, dependant on the temperature of the chilled coolant supply. A block heated to elevated temperature can also be rapidly cooled back down to reduce cycles times.
  
  

Operation:

• The OmniStation MKII has an ‘easy to operate’ / ‘easy to read’ revolutionary CTC (capacitance Touch Control) Control Panel, setting the required temperature and stir speed takes only moments.
  
  Heating is controlled by modern ‘state of the art’ micro processor based technology, which either controls the heat setting as a percentage of the total power capacity, or When the temperature probe is fitted, the heating is controlled via the temperature feed back circuit. All new dry blocks come with a inbuilt-in temperature sensor, allowing the true block temperature to be displayed. When using the external probe and dry block with in built sensor, the temperature displayed is that measured by the probe.
  
  The new An ‘all new’ digital controller and motor arrangement provides improved stirring control particular at slow speeds. Uniform stirring is provided via a motorised rotating magnet assembly positioned to provide maximum magnetic flux linkage to rotate the stirrer bars in each reaction vessel.
  
  Cooling capability is provided by means of a cooling plug accessory. The cooling plug is inserted into the core of the dry block. Chilled water or other liquid heat transfer medium is circulated through the cooling plug to provide an effective heat transfer medium. A dry block can be cooled from ambient to a defined lower temperature by the cooling plug, depending on the temperature of the circulated cooling fluid. A previously heated block can cooled down rapidly using the cooling plug in order to reduce cycle times.
  
  Sample losses from condensation can be prevented by using the reflux unit. The facility to purge your samples using an external gas supply is facilitated within the reflux. A common gas input together with multiple outputs allow for each reaction position to be individually purged.
  
  

Product Specification:

• Catalogue Number: OS1025
• No. of stirred positions: 10
• Stir speed range (rpm): 250 to 800
• Temperature range of block (°C): Ambient to 220‚ºC
• Max Vessel Capacity: 2 - 25ml
• Max Vessel Diameter: 24.5 / 25.5mm
• Supply Voltage: 240V
• Overall Dimensions Product (cm): Width 30cm Height 30cm Depth 30cm
• Shipping Weight (kg): 10kg