RS1 10-cell 1-zone Reaction Station RS1

Product description:

• • Choose the RS1 if you need a reaction block that has ONE
  controlled zone of 10 cells.
  Product Description
  • The single zone can be controlled over the complete temperature
  range from -30° to 150°C. Control heating and cooling ramp rates from 0.1 to 5°C/minute.
  

Operation:

• • Specially designed stir magnets ensure maximum coupling between the stir bar in the sample and the powerful motor. A range of magnetic stir bars are available, each for different applications.
  • Ramped motor speed control to avoid fragmentation of the sample or losing the stir bar.
  • Motor-fault error message is relayed back to the controlling system if the motor stalls or becomes jammed. Then an attempt is made every minute to restart the motor and if successful the “motor-fault” status is cleared. All the attempts are reported back to the controlling system.
  • Relative viscosity value is reported by the firmware back to the software, this feature is used to detect any changes in the viscosity of a solution. This value is created by noting the workload on the motor.
  • Other system status messaging include: cooling function; stirrer flea
  capture; heating function; block thermometer status; comms status;and heat exchanger status.
  

Safety:

• • The well-insulated heat block keeps the casework cool-to-the-touch while a thermal cutout eliminates runaway conditions. This combination of precise electronic control and rugged design ensures the safety to the end-user.
  

Applications:

• Water Cooled Aluminum Reflux Head Minimizes Sample Loss and Gas Inlet System Allows for the Performance of Inert Chemistry.
  • Efficient condensing and refluxing is provided through the use of an optional water-cooled aluminum reflux head. Cooling water is introduced through the inlet/outlet ports. Individual reaction positions are numbered (1-10) for ease of tube and sample identification.
  • A central gas inlet/outlet port combined with the gas-tight PTFE caps allow for a vacuum to be pulled and/or inert gas (nitrogen) to be ported into each individual tube, allowing reactions to be performed under inert conditions. Gas Tight Caps Allow Individual Reaction to be Performed
  • The simple open/close valve permits on/off control of the gas flow to the individual tubes, allowing individual reaction tubes to be isolated or removed during synthesis.
  Multi-Temp Controller can Monitor or Control the Temperature of Each of the Ten Reactions
  • The Multi-Temp Controller has 12 ports to hold 12 separate probes. The Multi-Temp unit can be connected to the Reaction Block and used to monitor the temperature of each tube.
  Software Package Designed for Controlling System
  • The software package operates from a PC. It contains a comprehensive data processing and data management software package, with scheduling made simple by using the Method Writer.
  

Product Specification:

• Catalogue Number: PS100001
• No. of stirred positions: 10
• Stir speed range (rpm): 250 - 1200 rpm
• Temperature range of block (°C): -30 Deg C to + 150 Deg C
• Max Vessel Capacity: 25ml
• Max Vessel Diameter: 24/25mm
• Interface: RS232, RS485, GSIOC
• Voltage: 100 - 240v
• Warranty: 12 months